Single RAM Relocation kit

This product relocates the mounting position for GPS/ cell phone to a more visible and safer location in front of the handlebars. This new location is much easier to see when riding and frees up handlebar space. This product integrates with RAM mounts to provide a mounting position that is both easier to see and safer for the device as opposed to the standard handlebar mounting positions. This has been used and tested by professional athletes in events ranging from trail rides, hard enduro, and Baja Racing.

The forward position also creates a safe location for your devices in the event of a tip over by allowing it to collapse through the mobility of the RAM products into the area between your handlebars and front fender as opposed to getting crushed between the handlebars and the earth.

 How/ where it is installed:

This relocation bracket uses the existing holes for the stock trail computer. Most dirt bikes with a trail computer are eligible for this product but may require additional modifications.

1.       Remove headlight assembly

2.       Identify and remove the two bolts that retain the computer to the upper triple clamp

3.       Discard the stock hardware (relocation bracket will come with new hardware)

4.       Identify whether your bike requires #5 or #6 hardware (both included)

5.       Place the new longer bolts through the Heavy Moto Relocation Bracket and into the triple clamp

6.       Mockup headlight assembly and mark the inside of the headlight frame where the ram ball will go through it.

7.       Cut or drill hole in headlight frame for the ram ball to pass through. Video HERE

8.       Re install headlight assembly

Additional Videos available HERE

buttons to complete purchase:

Bike: Beta full size bikes 200-500

    KTM full size bikes with dash computer/ or other SX KTM models with two #5-6 metric threaded holes in face of triple clamp 50mm from one another.

any other full size motorcycle with a dash computer mounted to upper triple clamp by two bolts 50mm apart.

Confirm option: I have confirmed by watching the video or through other means that my bike has the necessary mounting holes for this product to work.